Applications
Access
Basic
- Operating Temp 0 to 50°C
- Humidity RH 5 to 95% Non-Condensing
- Weight 290 grams
- Dimensions (mm) H 207 x W 40 x D 42
- Supply Requirement 12VDC / 1A Switch mode supply
- Power Less than 5 watt
Outside
- LED Display Tri colour LED indication to display verification results
- Audio Inbuilt piezo buzzer
- Enclosure IP65 rated weatherproof ABS-PC housing with sleek aesthetics
Inside
- CPU 8 bit Microcontroller running at 42 MHz
- Memory 4MB Data Flash
- Finger Print Module 533 Mhz, 32 bit, Dedicated DSP processor
- Finger Print Sensor Most rugged and accurate optical finger print sensor
- Tamper Detect 3 axis accelerometer to provide tamper detect TTL output signal
- Watchdog Inbuilt watchdog supervisor
Capabilities
- Template Storage Non volatile memory to store 9000 finger print templates
Credentials
- Resolution Fingerprint reader with 500 dpi resolution
- EER <0.1%
- Verification Time 1:1 match < 0.7 sec, 1:N match < 0.7 sec for less than 1000 fingerprint templates
-
Card Reader Support
Inbulit EM reader** (optional Mifare† , *HID® Proximity™, *HID® iCLASS®) for 1:1 match
**EM Proximity™ - 125KHz (4100, 4102, 4200) and *HID® Proximity™ - 125KHz
†Mifare - 13.56MHz (Mifare 1K/4K, DesFire, DesFire EV1) and iCLASS® - 13.56MHz
*Disclaimer: HID® Proximity™, HID® iCLASS® are trademarks or registered trademarks of HID Global Corporation. All trademarks, logos, and brand names are the property of their respective owners and are used here solely to indicate the use of genuine embedded modules for compatibility purposes.
Communication
- Communication 10 Base-T RJ45 ethernet interface (TCP/IP)
- LED Control Open collector input to control the green LED of device
- Buzzer Control Open collector input to control the buzzer of device
Interface
- Reader Interface Output weigand port, configurable from 26 bits to 255 bits/Clock Data
