Applications
Access
Basic
- Operating Temp. -10 to 50°C
- Humidity RH 5-95% non-condensing
- Weight 5.14 Kg.
- Dimensions (mm) H 362 x W 325 x D 83
- Supply 13.8V DC / 5 Amp with battery charger, provision to connect 12V/7.2 AH battery
- Power 4 Watts (excluding lock & readers)
- Input 180V AC ~ 230V AC/50 Hz
Outside
- RTC Non volatile real time clock contrast
- Display 16 chars x 2 lines high contrast backlit LCD, LED indication for reader & lock activity status
- Keypad 12 keys membrane keypad for local programming
Inside
- CPU 8 bit microcontroller running at 42 MHz
- Program Memory 512 KBytes
- Data Memory 2 MB flash & 256 KB nonvolatile RAM
- Watchdog Inbuilt watchdog supervisor
- Protection Miniature circuit breaker (MCB) for over current protection
Capabilities
- Database 30,000 card holders
- Transactions 55,000 time stamped events storage capacity
- Controller 4 Doors/8 Readers
- Reader Control LED control, buzzer control & reader tamper switch input
Communication
- Communication 10 Base-T RJ45 ethernet interface (TCP/IP) with status LED indications
Interface
- Reader Interface Weigand configurable from 26 bits to 40 bits/clock data, Eight reader ports
- Lock Interface 4 potential free changeover relays, contact rating 3A/30V DC, support both fail safe & fail secure lock assemblies
- Digital Inputs Optically isolated inputs for 4 door sensor, 4 exit switch & 8 general purpose digital inputs
- Digital Outputs 4 General purpose relay outputs
Firmware
- Time Zone 30 user defined time zones
- Access Groups 90 access groups
- Day Access Day of the week access
- Week off Groups 30 week off groups
- Holiday Groups 10 holiday groups, 30 holiday per group
- Anti pass-back Door wise anti pass-back
- Interlocking Interlocking facility available
- Digital Inputs Programmable general purpose digital inputs for monitoring devices and sensors
- Digital Outputs Programmable general purpose digital outputs for alarms
